LOCOLINES produce the only purpose-made transfers available, specifically tailored to fit:
  ROUNDHOUSE LADY ANNE, BILLY, RUSSELL, CHEDDAR SAMSON, ACCUCRAFT CARADOC
  AND EDRIG, and the WELLCHUFFED 'ARCHIE'. 
  ***TRANSFERS NOW ALSO FOR BOWMAN, BASSETT LOWKE AND MAMOD LOCO'S***
 

  These easy-to-apply transfer sets are carefully made to fit the panels
  of each locomotive without the need to fit separate lines and corners.
  Each panel transfer is printed with a fine triple-lining scheme that
  would be almost impossible to apply by hand.

  Add to that the inverse corners and the outer band of black, and you
  have almost instant 'box' lining that is found on few 16mm or 'G'
  scale models today.

  The lining is in very fine black-cream-black for the SAMSON,
  straw/brick/straw for the LADY ANNE,
  straw/brick/straw for the RUSSELL,
  cream/salmon/cream on blue only, for BILLY,
  cream/salmon/cream for CARADOC.
  brick/black/brick for EDRIG. 
  brick/black/brick for ARCHIE.   

  When you add to that the fact that there are also enough shaded letters for you to add your own railway company
  initials to the tank sides as well, (Note: NOT Edrig) you have a transfer set that is impossible to beat for the price!
  For a really superb result, you could even paint small loco parts in black.
  The instructions with the transfers explain it all.

PLEASE NOTE: As the actual body colours of the model locomotives vary so much, we have not tried to match the  background colours exactly. Our transfers are in a shade of the loco colour that will complement the fact the boiler and other small parts may be a slightly different colour (See rear cab frame/side tanks on the Samson image above).

If you have a particular loco you want CUSTOM livery transfers for,
contact us for details. The Cheddar Hercules on the left has been
modified with a custom printed 'Flying Scotsman' style set.

  FOR AN EXTRA £5 WE CAN ADD YOUR CREST TO ANY SETS TOO!
  Simply let us know the railway name to go inside the crest garter belt and your family name (so that we can insert your
  GENUINE coat of arms from our extensive database into the crest) and leave the rest up to us.
  You DO NOT have to provide any artwork, unless you want a specific item included in your design.
  (A further charge of £5 will be added if we have to re-draw your artwork)
  Crest location on loco as SAMSON image above. This price also includes tank lettering if required.

  You could also fit the BUFFER BEAM TRANSFERS to have a loco like the SAMSON in the picture in a matter of
  only a few hours! (Edrig comes complete with buffer beam transfers in a more realistic darker shade of red to cover
  the bright orangy Accucraft beams. If you prefer the original colour, do not use the buffer beam transfers.)

CARADOC example panel in dark blue
(Also available in green and maroon.)
Will suit blue, green, maroon and black loco's.
Lining: Cream/salmon/cream.
 

LADY ANNE example panels in Sage green. (Gamboge)
(Also available in dark green, maroon and blue.)
Will suit green, sage, maroon, blue and black loco's.
Lining: Straw/brick/straw.
 

 BILLY set in blue or maroon, with cream/salmon/cream lining
 as CARADOC.

 Comes complete with buffer beam and cylinder cover transfers.
 Will suit blue or black loco's.

 Matching tender set also available.

      Click thumbnails for larger image.

RUSSELL in maroon only.
Will suit maroon or black loco's.
NOTE: The maroon used in these transfers is
slightly darker than the Roundhouse colour.
Lining: Brick/straw/brick.

  Click thumbnails for larger image.

SAMSON example panel in green.
(Also available in maroon and dark blue.)
Will suit green, maroon, blue and black loco's.
Lining: Black/cream/black.
 

 
EDRIG example panel in dark green.
(Also in maroon.)
Lining: Brick/black/brick.



 

EDRIG in Great Eastern Railways Royal blue and crimson.
Will go on either green or maroon loco's but the boiler will
require painting.
We recommend PRECISION PAINTS GER BLUE.
Of course, you could simply paint the boiler satin black.

This set looks SUPERB if used with the LINED FRAMES
set below.

  EDRIG is also available in the GWR 'CITY OF TRURO' multiple brick/black/green style:


 Click thumbnails for larger pictures of the GWR lining set.
 (Cab signs and brass nameplates not included.)

The excellent driver figure in 'City of Edrig' is from the superb BUSY BODIES
range from Rob Bennett.

You can find out more from:
BUSY BODIES,
5 HAWKSTONE COURT,
WESTON UNDER REDCASTLE,
SHROPSHIRE.
SY4 5XG

 Why not visit www.robbennett.org

ARCHIE panel transfers available in dark blue and dark green with Brick/black/brick lining.
(Click thumbnail image for larger picture)

 

GRS FAIRLIE KIT complete panel transfer set for the new
GRS resin and metal Fairlie kit.
Available in green with red lining.

With or without the 'Fairlie' name panels.

ROUNDHOUSE MILLIE SET

Available in Blue, Maroon and Green
Lining: cream/brick/cream.
 

 ACCUCRAFT WREKIN SET

Available in Maroon, Blue and Green.
Complete with buffer beam transfers.
Lining: brick/black/brick

             Click the thumbnails to see Chris Bird's beautiful locomotive.

 PLEASE NOTE: THESE EXAMPLES ARE LOW RESOLUTION.
 ACTUAL TRANSFERS ARE PRINTED TO AN EXTREMELY HIGH DEFINITION
 WITH CREST TEXT OF 0.5MM BEING PERFECTLY READABLE.
  INNER PANEL COLOUR IS A CLOSE MATCH, BUT NOT IDENTICAL TO LOCOMOTIVE BODY COLOUR. (SEE SAMSON IN PICTURE)

 All full panel lining sets: £30.00 plus £1.50 p/p  
 (£35.00 with crest, plus p/p)
 EDRIG SET at the special price of just £25 plus £1.50 p/p
 Billy tender set £18. (£23 with crest.)
 Order 'CUSTOM SETS' and state make and colour of loco.
  ALL SETS £20 IF YOU ARE BUYING THE LINED CABBED TENDER AT THE SAME TIME.
    SEE ROLLING STOCK PAGE FOR DETAILS.
 

  CITY OF TRURO STYLE FRAME TRANSFERS FOR EDRIG
(ALSO FITS CARADOC AND MORTIMER)
 

Now you can combine the 'City of Truro'
lining set or the GER Royal blue set
(above) with our new lined frames set to create
a really superb locomotive.
NOTE: These transfers DO NOT require
the loco to be dismantled, but do need to be
cut and fitted carefully.




Click thumbnail for larger image. (Curved brass nameplates not supplied)

 

  £12.00 plus £1 p/p 
 (If bought with GWR Edrig lining set, £30 complete plus £1 p/p)
 Order 'EDRIG FRAMES'
 

EDRIG CAB SHEET

  Made to fit Edrig, this simple one-piece transfer will enhance your loco dramatically. No need to dismantle anything.

Click thumbnail for larger image.

   £4.00 plus £1 p/p 
    Order 'EDRIG CAB SHEET'

GRUBBY BACK CABSHEET

   A large size transfer that will fit almost any rear cabsheet wall. Suitably 'sooty' and smudged!
   Easily trimmed to fit, easy to apply.
    Saves all the hassle and bother of painting your cab and trying
    to get a nice 'well-used' look.

 £5.00 plus £1 p/p
 Order 'GRUBBY CAB SHEET'

APPLE GREEN WITH 7-LINE PANELLING!

YES, THAT'S RIGHT!....  7 LINES!

  After a long period of careful design LOCOLINES proudly offers a full lining set for CHEDDAR SAMSON,
  ROUNDHOUSE LADY ANNE and ACCUCRAFT EDRIG in a style reminiscent of the famous rebuilt
  FLYING SCOTSMAN.
  (Soon also available for the  ACCUCRAFT CARADOC and ROUNDHOUSE 'BILLY'.)
  This set is best applied to black, apple green or dark green loco's.

  Add to this the buffer beam transfers and your loco will be a real SHOW STOPPER!
  (Edrig set comes complete with buffer beam transfers at the special price of only £25!)

The example shows just how amazing this lining scheme is,
 with lines as thin as 0.3mm! (Example considerably enlarged)

 Just imagine, your loco painted with
 brick red/brown frames, white rimmed wheels
 and bodywork like this!

 And don't forget... side tank lettering is included in the price!

  A typical full-panel lining set comes complete with transfers for both tank sides,
  tank ends, cab sides, bunker sides and rear (Last two, Lady Anne only) cylinder
  covers, steps, oil lubricator and servo covers. (These last two, Samson only)
  Also included are sufficient letters for you to add your own railway name or initials to
  the tank sides. (NOT Edrig)
  REMEMBER... For a further £5.00 we can add YOUR railway crest.
  (See note above)

 £32.00 plus £1.50 p/p 
 EDRIG SET  only £25.00 plus £1.50 p/p
 Order 'APPLE GREEN CUSTOM SET' and state LOCO TYPE.
 

IP ENGINEERING BREDGAR & WORMSHILL
COACH KIT SETS

  Developed with full co-operation from IP Engineering, these transfer sets are made-to-measure to fit the kits perfectly.
   Simply cut out, soak in warm water and apply to a gloss-painted surface on your model.
   Lettering strips are included with the sets to add if you wish. The transfers are a maroon colour with cream lining and
   look excellent on the models. They are not guaranteed to match the Bredgar maroon exactly. As with the kits
   themselves, the transfers are a 'representation' of the Bredgar coaches.

  NOTE: These transfers are a nice deep shade of oxblood maroon. The models shown by IP Engineering on their
  website were not finished using these transfers.

GUARDS COACH SET

2 COMP PASSENGER COACH SET

SHORT PASSENGER COACH SET

  £15.00 plus £1.50 p/p per set. Order 'BREDEGAR' and coach type.

CORRIS COACH PANEL SET

At last! a waterslide transfer set specifically made to fit the superb
'PERFECT WORLD' CORRIS COACH KIT.
(Visit www.perfworld.freeserve.co.uk)

  Carefully capturing the highly complex interwoven lining pattern of the beautiful CORRIS coaches has always been a
  nightmare for railway modellers.
  WELL, NOT ANY MORE!
 

Now you can apply this amazing scheme in a few hours by fitting
the one-piece panel transfers from LOCOLINES.
The interwoven pattern has been carefully reproduced to fit the
'PERFECT WORLD' kit but can just as easily be used by
modellers scratch-building the coach for themselves to the same scale.

  This shows the complexity of the corners
  of each panel, painstakingly copied from
  original photographs and drawings.

  ALL the panels are included, even the inside
  vestibule sides! (Full instructions included)

  PLEASE NOTE: Due to colour printing limitations, the gold lining is printed
  in 'writers gold' - a cream-beige colour.
  Metallic inks cannot at this time be printed.
  *The fit of these transfers is dependant on you building the kit accurately according
  to Perfect Worlds instructions and dimensions.*

Click for larger image

 £25.00 plus £1.50 p/p  Order 'CORRIS SET'  

S &H 'SCARAB' PANEL SET

A full panel set to apply to the superb SMITH AND HARRISON 'SCARAB'

  Produced from actual measurements from S&H, this transfer set will make
  your little SCARAB look amazing!
  A triple black/red/black lining scheme on a yellow background than can be
  supplied with the name SCARAB or with
  ANY NAME OF YOUR CHOICE.
  Full instructions enclosed. Available in yellow or pea green only.

 £12.00 plus £1.50 p/p
  Order 'SCARAB SET' and state colour.

BOWMAN GREEN LOCO LINING SET

   A complete set of lining, curves, badges and lettering for the green BOWMAN locomotives. Due to the age and
   inevitable colour variations of these loco's, our transfers are printed on a mid-green background. With careful cutting
   they will match almost any BOWMAN loco body colour.

   £25 plus £1.50 p/p
  Order 'Bowman'

BASSETT LOWKE MAKERS TRANSFER

An accurate replica of the old style BASSETT LOWKE makers transfer.
Actual size: 24mm x 16mm.

The actual transfer is printed to a very high resolution.
Supplied in packs of 4 badges.

  £3.00 plus 75p p/p
  Order 'BASSETT BADGE'
 

'MAMOD' MAKERS TRANSFERS

An accurate replica of the 'MAMOD' makers transfer.
Actual size: 60mm x 18.5mm.

The actual transfer is printed to a very high resolution.
                                               Supplied in packs of 4 badges.

  Also available in two other styles: 

  £3.50 plus 75p p/p
  Order 'MAMOD BADGE' and state clearly style required. (Square, shortcurve or longcurve)

BOWMAN TRANSFER

   An accurate replica of the BOWMAN makers transfer.
   Actual size: 38mm dia.

    Available in 3 styles as shown.
   Supplied in packs of 4 badges.
   £3.50 plus 75p p/p
  Order 'BOWMAN BADGE' and state clearly type required.

The following review appeared in the June 2006 issue of
GARDEN RAIL

 Locolines Deluxe Waterslide Transfers by Steve Ciambrone 

Locolines has solved the problem of high cost custom painting of locomotive lining for those of us on a budget. The Locolines price for the Accucraft ‘Caradoc’ Deluxe lining set is £30.00. Don’t get me wrong, custom lining is well worth the cost and the modeller is paying for the talent and patience of the custom painter. 

Locolines website address is www.locolines.net. In addition to the ‘Caradoc’ transfers they have transfers for other engines, buffer beams, custom transfers, and a nice selection of other products.  Transfers are ordered in the main body colour of your loco. My ‘Caradoc’ is blue, as delivered by Accucraft, so the matching ‘Caradoc’ set was ordered. After a reasonable amount of time for shipment to the USA my transfer set was received. The transfers arrived in a large envelope and protected by stiff paperboard. Included in the package was a Locolines Catalogue and instruction sheet. The decal sheet is a large sheet of waterslide transfer paper. I was very impressed with the quality of the water transfers and the crisp clean lines. The outer colour is black and the main colour is a matching Accucraft blue. The lining is cream/salmon/cream triple lining. In addition to the main body panel decals, additional straight lines and corners are included on the sheet for lining the cylinders or whatever the modeller desires.  

First thing was a thorough reading of the directions for the water transfers. There was nothing I was not familiar with when applying transfers, so it was time to clean off the workbench for a clean environment to apply the decals. I had run my ‘Caradoc’ before, so a good cleaning was required. The ‘Caradoc’ body is easily removed from the chassis by removing the 4 screws. Another thorough cleaning was done to remove any traces of steam oil. It was recommended in the instructions to use a straight edge to help cut out the decals. I broke out a new # 11 E-xacto blades so sharp cuts were assured. With close attention, cutting out the decals was an easy task.  I readied the ‘Caradoc’ body and positioned the body so the area where the decal was to be applied was horizontal. I soaked the decal in a solution of warm water and a few drops of PVA.  The decal started to release in about 15-20 seconds. As usual for water slide decals, the decal was placed in position then the backing paper gently pulled away. The decal fell into position and then was moved to its final position with a paper towel.  The excess water was gently blotted away. Ample time was available to check and adjust the position of the transfer. I took my time when applying the decals, allowing the applied decals to take a set and then reposition the ‘Caradoc’ body for the next side.  

‘Paint & Lining’ Job 

It took me two evenings to apply the decals. As suggested in the instructions, I applied (Testers) gloss black around the edges of the decal panels to cover up the edges of the transfers. The decal and paint blended together and the difference could not be seen. For added protection, I then applied Model Master Acryl Gloss Clear over all the decals. I used a ‘brushed on clear’ so I would not have to spray clear over the entire body. Locolines instructions state the clear coat is an option and not really required.  When dry, the ‘Caradoc’ body was re-attached to the chassis. It was time to step back and enjoy the results. The Locolines Transfer set for the ‘Caradoc’ turn a ‘plain Jane’ loco into a real beauty.  I consider myself a talented modeller but I could never pull off a ‘paint and lining’ job such as the Locolines decal set can provide. I am very satisfied with the results of this product. 

  Photo 1 – ‘Caradoc’ as delivered. (Click image to enlarge)  

  Photo 2 – Locoline set applied – doesn’t it make a difference. (Click image to enlarge)

  TO ORDER ANY OF THESE TRANSFERS, SEE TERMS/CONDITIONS/DETAILS ON THE HOME PAGE.