At Locolines we are pleased to announce our involvement in other gauges of the hobby.

  'N' Gauge NRM Deltic prototype transfer set
AND READY-TO-RUN

   A complete set of waterslide transfers and full instructions, on how to convert the Graham Farish
  Class 55 Deltic model into a very good look-alike of the famous blue prototype.
  The Graham Farish loco is very accurate, except for a slight difference in length and some details.
  The instructions include taking the model apart, removing the existing roof side vents, making
  the nose light and buffer cut-out, and comprehensive details on painting and fitting the transfers.
  This project is not difficult even though the loco is small, but it is not recommended for children.

  Best of all, the transfer set contains TWO complete sets of transfers in slightly different shades of
  blue so you can match your paintwork accurately.

   £10.00 plus £1p/p Allow 14 days for delivery

   

Fancy the 'Deltic' loco, but don't want to do the conversion? LIMITED EDITION R-T-R MODEL   A strictly limited run of 20 models are being produced by Locolines.  Each model will be accompanied by a signed certificate.  This model is guaranteed to sell out very quickly so if you want one,  ORDER IT NOW!  £140 plus £4.00 p/p  Contact us for further details.   '0' Gauge Flying Scotsman kit cab transfers  A set of cab front lining transfers and cab interior gauge transfers.   These transfers were  specifically designed for the '0' Gauge part-works kit but can be used on any 'O' gauge loco  kit of the same class. LNER apple green only. Also included are sufficient dial transfers to  complete any of the numerous cab variations.  Simply cut out the transfers, soak, then apply. Care has been taken to match the green colour  but we cannot guarantee it will match all the numerous LNER green model paints available.  Surprisingly, they do vary. £5.00 plus £75p p/p Allow 14 days for delivery