A new range of parts and model kits for garden railway enthusiasts.
  These models are seriously sturdy and solid, ready-coloured and printed on 'high density
  laminated construction board' that is specifically bonded and pressed for us.
  Keep checking to see what new models we are introducing.
  We are also continuing to add new parts to our catalogue for the home builder.
 

IVOR THE ENGINE

 With full permission from Oliver Postgate, Peter Firmin and Smallfilms, Locolines is proud to present
  IVOR THE ENGINE.
  A comprehensive kit that contains the chassis, motor and wheels gauge, there's no need to
  buy anything else. A wealth of resin castings is included to create that authentic 'cartoon' look of
  the original. There's even a genuine Rob Bennett figure of 'Jones the Steam' in the kit!
  As with all our kits, there's very little to paint except for the resin castings - everything is pre-coloured.
  Red-spoked wheel inserts are even included to make the wheels look like Ivors.
  Copper chimney cap and brass handrails included along with comprehensive photo instructions.
  Build the kit and we defy you not to say 'psshhticuff psshhticuff'.
  NOTE: The kit can be built in either 32mm or 45mm gauge.

  SEE BELOW FOR THE FREE COACH KIT....

 
Click thumbnails for larger picture.

   £59.99 plus £4.00 p/p Delivery approx 21 days

   Buy 'Ivor the Engine' and you can download the FREE coach kit.
 

  Further Ivor figures available soon.

WICKHAM TROLLEY

 AVAILABLE IN 16mm & 7/8 SCALE
SEE BELOW FOR DETAILS

  A COMPLETE KIT of the well known Wickham Trolley. (Also known as a Wickham tram)
  As with our IVOR kit above, this model is a complete kit, containing the motor, axles, gearbox,
  chassis parts, wheels, battery box, switch, glazing, and of course.... the tram!
  The kit can be built in either 32mm or 45mm gauges, and can also be built in a large variety
  of body side styles. This kit is accurately scaled for 16mm modelling OR 7/8 scale, but looks
  equally good on 'G' scale layouts.
  Complete with comprehensive photo-instructions, this must be one of the CHEAPEST loco
  kits currently available.
  Full colour bodywork as shown so there's virtually nothing to paint. This doesn't mean that there
  isn't loads of room for super-detailing though. Sage green, but ask for any other colour of your
  choice for only an extra £5. Enquire for custom crests and lettering.
  ALSO AVAILABLE WITH 'PLAIN' ENDS. (NO CHEVRONS, GREEN BODY COLOUR)
  This kit is so inexpensive, it would even make an ideal basis for scratch-modellers.

   £19.95 plus £2.50 p/p 16mm SCALE KIT. Delivery approx 21 days

 

  £25 plus £2.50 p/p 7/8 SCALE KIT. Delivery approx 21 days

   
 

KERR STUART 0-4-0 DIESEL

  This little diesel shunter is probably one of the most well known locomotives running on narrow
   gauge rails today. The kit is correctly scaled for 16mm railways and can be built in either 32mm
   or 45mm gauge, being a complete kit with chassis, motor, gearbox, wheels and axles.
   There really is no need to buy anything else. Even the battery box, switch and wiring is included.
   The model is available in light grey, pale light green or red primer. Of course, you could always
   spray your loco matt or satin black if you like.
   Complete with easy to follow photo-instructions.

   £25 plus £2.50 p/p.  Allow 21 days for delivery

  

PULLMAN COACH KIT

  Due to popular request, we are now pleased to introduce the PULLMAN COACH KIT.
  This is a very substantial kit, measuring over 500mm in length over buffers. Dripping with
  lining, panelling and interior wall detail, this is one gorgeous coach. Even the vestibule ends are
  fully detailed inside with marquetry style walls, carpets and even menus. As with all our new
  kits, there's no need to buy anything else. The kit comes complete with wheels, axles and buffers
  as well as an MDF floor, plywood roof and brass coach end pipes.
  Fully pre-coloured as shown, the only thing you need to paint is the roof and buffer beams.
  Available in 32mm gauge with a simple modification kit for 45mm gauge upon request.

  Soon available as a Guards/Brake coach.

Click for larger interior detail picture of actual kit.

    Optional names shown on Guards coach. (Not yet available)
    Enquire for details if you require name boards or roof boards.

  £59.95 plus £4 p/p Delivery approx 14 days

 

  
'PRINCE' AND TENDER

  Due to popular request, we are proud to introduce one of our most attractive and comprehensive
   kits to date.  'PRINCE' has been designed following accurate drawings and photo's of one of the
   engines currently in use today. As with all our kits, the bodywork is fully pre-coloured, meaning
   there is an absolute minimum of painting to do. Although this kit may look a little more
   daunting than some of our other models, it is in fact still very easy to build. We like to call our
   models 'Er-indoors friendly'. No need to vanish into the workshop or shed for hours at a time.
   A tray, a knife and ruler, some glue etc. and you can sit in the lounge keeping your nearest and
   dearest company as she watches television. This kit can be built in around 3 evenings.
   The kit also includes a plastic pre-formed curved tank top, so getting that shape right is no problem.
   Also included are our new 'easy-form' smokebox and roof parts ensuring a nice, smooth curve.
   The model shown is in correct red with yellow/black lining, although on the actual kits the tank
   top between the black lines is coloured black, as per the real loco. The kit is also available in maroon
   or dark green with grey/black lining. PLEASE STATE COLOUR CHOICE WHEN ORDERING.
  
   ALSO REQUIRED: One set of IP Engineering 'Hudson' axleboxes, 24mm dia wheels of your
   gauge, IP Engineering 'Budget' chassis kit. Buffers/couplings of your choice.
   Of course, there are numerous other chassis/power options you may wish to use.

  
Click thumbnails for larger image.

   £35 plus £3.00 p/p  Remember to e-mail us your colour choice.

  

 
'TITCH' STEAM LOCO KIT

  A NEW MODEL BOARD KIT to build the attractive little 'TITCH' LOCO.
   Designed to fit any of the small 0-4-0 chassis currently available from I P Engineering, Essel
   engineering, Locomotion and L.C. Models.
   This is a BRAND NEW kit, completely designed from scratch. Although there is a family
   resemblance to our old TINY kit, this is no simple re-vamp!
   The model is now more accurately scaled for narrow gauge railways, being a full 10mm
   narrower than the old model. The cab and rear have also been completely changed to allow far
   better access to the cab interior.
   The roof and smokebox curves are now extremely easy to form, an improvement from the
   old model. In fact, the whole kit is easier to build than before.
   If you have ever built model board lineside building kits, then you can build this loco.
   Basic tools, varnish, glue and double-sided tape are all you need.
   Comprehensive illustrated instructions included.

   NOTE: Tank lining now the same as on smaller blue and maroon sheet images below, NOT with
   curved top ends on the cab doorway as built kit shows.
  
   

 Click thumbnails for larger image.

  Available in Dark green, Royal blue and Maroon.
  Please e-mail with your colour choice when ordering on-line.

    Click images to see customer built and modified models of our old TINY kit.

   £30 plus £2.50 p/p Delivery approx 14 days

 

   Remember to call us with your colour choice!

   For an extra £10.00 you can have your own names and crests added.
  Call us to discuss this option
  Standard IP Chassis approx £25, so for around £60 you can have a complete locomotive!
   (Deluxe chassis recommended.)
 

CAB-TENDER KIT

   A body kit to build a fantastic cabbed tender that perfectly matches the TITCH loco.
   Extremely easy to build in a few hours, this tender will be the envy of your friends, particularly
   if you couple it with the TITCH, MAMMOTH, or QUARRY loco kits.
   As with all our kits, it comes fully pre-coloured and lined, needing an absolute minimum of
   painting. IP Engineering 'Hudson' axle boxes and wheels recommended, but of course you can
   fit any running gear you choose.
   Available in green, blue or maroon.
   Comprehensive photo-instructions included.

   £15 plus £2 p/p Delivery approx 14 days

   
 

LOCO AND TENDER KITS

  Why not combine the TITCH loco and the CABBED TENDER kit and build a really impressive
   locomotive setup. Reminiscent of the 'Fairlies', but with a difference.
   These kits were actually designed to complement each other, so there's no way they aren't going
   to match. Designed to fit any of the small 0-4-0 chassis and running gear readily available from
   many of the garden rail suppliers such as IP Engineering, Essell, L. C. Models, Locomotion, etc.
   A really attractive loco/tender combination that you can have running for around £70.
   Available in green, blue or maroon. Comprehensive instructions included.

 £40 plus £3.50 p/p  Delivery approx 14 days 

  

'QUARRY' LOCO BODY KIT

  This kit is based on one of the famous Welsh Hunslets, but with a few modifications to make
   it fit any of the small 0-4-0 chassis currently available from I P Engineering, Essel engineering,
   Locomotion and L.C. Models.
   The kit comes in maroon, red or green, fully lined as per the pictures below.
   The cab can be built 'full' as shown, or cut down to make the famous 'half cab' loco everyone
   is familiar with. Open toolbox also supplied as shown.
  

                                  

                                   
   The kit above is a 'cut down' version, built and modified by Paul Cage using IP Engineering parts.

   You will also need:
   0-4-0 small chassis as listed above. (Or build your own)
   Buffers of your choice.
   Any additional cab and cylinder detail you require. (Parts suggestions supplied)

   Full instructions provided. 

   £20 plus £2.50 p/p  Delivery approx 14 days

    Remember to call us with your colour choice!

 
GVT 'SIR THEO' LOCO BODY KIT

  After numerous requests, LOCOLINES proudly presents Sir Theo.
   This kit is closely based on the famous GVT tank locomotives 'Dennis' and 'Sir Theodore'.
   The kit comes complete as shown in the pictures and will run on any of the small 0-4-0 chassis
   currently available from I P Engineering, Essel engineering, Locomotion and L.C. Models, or any
   of the larger 0-6-0 chassis by the same manufacturers.
   The kit is fully pre-coloured in sage green, only requiring the boiler tube and funnel to be painted
   and is formed using our own laminated modelling board, wood and metal components.
   The model can be built in a few hours and will be the envy of those who have paid large sums
   for their GVT kits elsewhere.
   Full illustrated instructions provided.
   Numerous extra detail parts and buffers/couplings available from many garden rail suppliers.
   Length 245mm,  Width 110mm,  Height 140mm to funnel top.

   Also available in emerald green with white/red/white lining.

   £25 plus £2.50 p/p  Delivery approx 14 days

    Remember to call us with your colour choice!

 
STEAM LOCO-RAILCAR 'LOCOACH'

  Based on the 'Titch' locomotive kit, 'Locoach' represents one of the loco-trams used on various
  narrow-gauge railways in times gone by. The front of the locomotive is the same as the front of the
  'Titch' loco, but without the rear cab section, (although this part is included in the kit so you could
  actually add this and make your railcar even longer!) The rear carriage section is highly detailed with
  'woodgrain' battens and full lining. The carriage section is the same colour as the locomotive.
  Metal buffers, funnel and plastic roof vents included but not boiler dome.
  Available in the colours of the 'TITCH' LOCO KIT.
  'TOMMY' face as above included.
  You can also have YOUR RAILWAY NAME AND CRESTS added for an extra £10.

  You will also need the following items:
  2 x IP Engineering 24mm dia. wheelsets (your gauge) and 2 x Hudson axlebox sets.
  IP Engineering motor/gearbox kit or supply your own.
  6 or 8 cell battery box and switch.
 

   Completed kit shown with added brass dome and optional lettering and crests.
   Overall length without buffers 358mm.

  £45 plus £4.00 p/p Delivery approx 14 days

    Remember to call us with your colour choice!

'MAMMOTH' STEAM LOCO KIT

    A MODEL KIT to build the new 'MAMMOTH' LOCO.
   Completely re-designed from our old large-size loco kit, this model is far easier to build with
   new easy-form roof and smokebox parts. The cab and rear are now also open for far easier
   cab access, so you can add figures with ease if you choose.
   Designed to fit any of the 0-6-0 chassis currently available from I P Engineering, Essel engineering,
   Locomotion and L.C. Models, or build your own.
   The kit contains all the parts needed to build the entire body, including plastic boiler and metal funnel.
   The kit comes in full colour, already lined as shown below.
   Overall length without buffers 270mm.
   Basic tools, varnish, glue and double-sided tape are all you need.
   Comprehensive illustrated instructions included.
   Pictures of the completed model will be here soon.

   Available in dark green, Royal blue, or maroon.

  £30 plus £2.50 p/p Delivery approx 14 days

 

   For an extra £10.00 you can have your own names and crests added.
   Call us to discuss this option.

'VICTORIA' TRAM LOCO KIT

  A kit based on our 'AMBASSADOR' tram model. Heavily lined and panelled, complete with
  sufficient planking to give a truly '3D' effect to the detail. Plastic windows and roof bell included.
  Also included is a 'Tobias' face to add to your tram if you wish. Sage green only.
  Designed to fit any of the 0-4-0 chassis currently available from I P Engineering, Essel engineering,
  Locomotion and L.C. Models. Plenty of room within the body to even add R/C!
  Comprehensive illustrated instructions included.

  Length: 230mm.  Width: 100mm.  Height (without bell): 135mm depending on wheel diameter.
  Picture shows tram with supplied face fitted. Centre buffers not included.

  £30 plus £3.00 p/p  Delivery approx 14 days

    Remember to call us with your colour choice!   Have your own names and crests added for an extra £10
  Call us to discuss this option.

'PRINCE ALBERT'
GWR STYLE RAILCAR

 This large model is loosely based on the well known brown and cream GWR rolling stock although
  our colours are deliberately slightly different, with a slightly more maroon-brown, and deeper yellow.
  All parts in full colour as per the picture above.
  The railcar kit comes with control panel detail as well as an attractive interior.
  The body is heavily lined and panelled in an authentic looking GWR style.
  Plastic roof vents and window glazing included.
  You will also need wheelsets, axleboxes and a motor/gearbox kit from IP Engineering.
  Fully comprehensive instructions including how to make the bogies and power bogie are included.
  This kit contains well over 80 parts but is no more difficult to build than any of our other models.
  Lighting can be added easily as can many other features including radio control.
  Dimensions: L 400mm x W 110mm x H 145mm (depending on your choice of wheels)
 
 
 £45 plus £4.00 p/p  Delivery approx 14 days

 

  Have your own names and crests added for an extra £10
  Call us to discuss this option.
  Why not build a second model as a trailing car?
 

'CHUNKY' DIESEL SHUNTER    
ALSO NOW AVAILABLE IN 7/8 SCALE
(Yellow only in 7/8 scale - See below for prices)
 

    
2 roof options included in kit:  'Shed' roof and 'Peldon-ish' curved-edge roof
(PLEASE NOTE: Sideframe access doors now corrected to centralised location on kit.)

   Introducing 'Chunky', one of our cheapest loco kits. With the current interest in small shunting
  diesels, it seemed appropriate  to create a kit that would be easy to build, yet have sufficient
  detail to keep the fussiest of modeller happy. The bonnet sides and front have real metal
  mesh grilles and through them you can see the radiator and engine detail. There is internal cab detail
  and both front and rear have black and yellow 'wasp' chevron markings. Loosely based on several
  well known industrial locomotives, 'Chunky' will fit in whatever your line requirements, and by
  using any of the 0-4-0 chassis currently available from I P Engineering, Essel engineering,
  Locomotion and L.C. Models you could have an extremely powerful workhorse that is
  capable of pulling almost anything. (Depending on chassis used)
  Can be built in either full-cab with 'Peldon' style roof as shown, with an apex 'shed' style roof, or open
  half-cab versions. All parts in full colour as per the picture above.
  Bonnet curves and 'Peldon' roof curves are pre-formed in wood.
  For the 7/8 scale modellers among you, 'Chunky' is also available with a taller cab to suit.
  And don't forget... There's nothing stopping you painting the model satin black if you wish.....

  Length: 195mm.  Width: 85mm.  Height: 145mm. (7/8 version taller)

  Buffers and chassis (or self-build) required. 32mm or 45mm gaugeable.

AVAILABLE IN YELLOW, GREEN, BLUE OR MAROON

  £15 plus £2.50 p/p  16mm SCALE Delivery approx 14 days

    Remember to call us with your colour choice!

  £20 plus £2.50 p/p  7/8 SCALE  Delivery 21 days 

   

 
 For an extra £10, have your own company names and crests added.
 Call us to discuss the above options.

BUY THE 'CHUNKY' DIESEL AND THE
WAGON KITS FOR ONLY £22 PLUS £2 P/P!
(16mm size only)

 

PAIR OF GOODS WAGONS KIT

  A simple to build planked goods wagon kit. Ready-coloured and printed and mounted
  sturdy construction board that is specifically laminated and pressed for us, this wagon will
  enhance any railway.
  Why not use our 'Rolling Stock' transfers to add even more detail?
  Built in an evening, you have no reason now to have a railway with no goods stock.
  AND BEST OF ALL?... THE KIT COMES WITH TWO WAGONS!
  Yes, that's right, this kit contains TWO goods wagons.
  Extra planking strips are supplied so that you can build up the support strips and strapping to give
  a really realistic '3D' effect. Can be built to 32mm or 45mm gauge.
  Kit contains all parts to build two planked wagon bodies with wooden chassis strips.
  Body dimensions: L 190mm  x W 90mm x H 45mm
  Comprehensive instructions included.

    IP Engineering wheelsets of your gauge and 'Hudson' style axleboxes plus buffers required.

    £12 plus £2.00 p/p  Delivery approx 14 days

 

  Why not add a character face to your wagons? (See below)

 For an extra £5 you can have any company name added.

BUY THE 'CHUNKY' DIESEL AND THE
WAGON KITS FOR ONLY £22 PLUS £2 P/P!

CATTLE WAGON KIT

  An easy to construct kit of a standard type open plank cattle wagon. As with all our kits, the parts
  are all pre-printed in colour and bonded to high quality dense model board.
  Strapping strips are provided so that you can add a '3D' effect to the metal straps, and if you fancy,
  you could even make the doors open.
  Rectangular character face included to use if you wish. (See below for examples)
  Body dimensions:  195mm long X 95mm wide X 112mm high.
  Buffers, axleboxes and wheels of your gauge required.
  (We recommend IP Engineering 'Hudson' axleboxes, wheels and centre buffers)
  Comprehensive and easy to follow instructions included.

  £10 plus £2 p/p  Delivery approx 14 days

 

 LOCO & ROLLING STOCK CHARACTER FACES

  Do you get hounded by the kids, or your grandchildren to get some 'familiar' faces on your line?
  Well now you can! These easy-to-apply faces are printed on self-adhesive glossy stock for you
  to cut out and apply as you wish. Stick them directly to rolling stock, or mount them first on
  thicker card or thin ply, then stick them with blu-tak on the fronts of loco's, coaches, whatever!
  Or make a wire 'loop' and fix it to the back of the face of your choice and hang it over your
  locomotive funnel.
  Easy to put on, easy to take off. (Images below shown low-resolution)

Four faces per sheet. Approx size 50mm height.

   £2.50 per set plus 75p p/p  Delivery approx 14 days